Fuel and Cooling

Tuning the Edelbrock 1403 Carburetor

I have been tuning the Edelbrock 1403 Carburetor on my Champ truck with a Studebaker 289 engine in it. The engine is slightly modified with R3 intake and exhaust valves along with R1 cylinder heads. This small modification should not be a significant modification to differ from a regular 289. I have experimented with differing metering rods. I have been trying to obtain the best fuel mileage while getting the best performance out of the engine. I think that I have now found the best combination of metering rods for the Edelbrock 1403 when installed on our Studebaker 289 V8 engines. This note is to pass on what I learned and save you from doing the same experiments while tuning your engine. Use Edelbrock Number 1461 metering rods which are 70 X 52 using the same jets that came with the 1403.

These can be obtained from Doug Forbes at C. Smith Machine Shop in Wooler, Ontario and cost around $12. for the pair. The vehicle pulls strong and part throttle response is absolutely great. I have not determined the exact mileage that the truck is now getting but anything is an improvement over the factory settings.

More in Fuel and Cooling

Stuck on a problem with your own car?

Ask Our Tech Advisor